About Me

My photo
HI i am passionate of aviation engineering the main purpose of making this blog is to show my abilities related to the field of aviation.

Sunday, April 15, 2018

EFI MAP SENSOR ENHANCER FOR FUEL SAVING

Map sensor enhancer to save fuel

Tuesday, April 3, 2018

Painting rims at home

Honda civic star rims painting at home

Item needed
1.  Spray paint can of your choice 2 spray cans for 4 tyres
2. Liquor spray can (clear coat can) 1 spray can for all.
4 sand paper of 300 grids no

3. Card sheets  or playing cards

Process
1 take out tire from car
2. Wash the tyre and rim thoroughly with the help of scotch bright dish washing spunch and surf
3. Then dry the tyre in sun light
4. Clean the tire with dry micro fiber cloth
5. Place the cards on tyre and rim joining such as shown in pictures
6. Now rub the rim with the sand paper to remove irregularities of old paint and spots
7. Clean rim with cloth
8. Apply three coats of paints with interval of 10 minutes and then apply 2 coats of clear coat with interval of 20 min and let it dry for 6 to 7 hours in clean place so that no dirt stick on the clear coat
9 now after get dried clean the rim with micro fibre cloth with. No pressure on hand and cloth it may damage clear coat
10 now apply the car wax polish on rim with applicator and let it absorb for 10 min and polish it with coton cloth

Rim ready to install

Sunday, October 29, 2017

Honda cg 125 vibration solution

If you want to reduce the vibration and sound of honda cg 125 classic pakistani model then you have to place a     16T teeth sporket at engine side front this will reduce the vibration in honda cg 125 pakistani model

Modification will be

 16 t  at engine and 38t rear wheel

Stock is 

15t at engine side and 38 t rear wheel side

I also use a metalic bush with thin hole in it to reduce the sound when i needed more sound i simply remove that bush with a plyer plas and get again cg cracking sound

Along with that bush it sounds like suzuki gd 110 or gs 150 its ur choice open the hole more for more sound and less for less sound but not that much less which could eventually effect ur pick up

I made this bush from hot air soldering machine nozels which are easily avaible in electronic market in 50 rupees